3.6 防火墙源NAT-三元组NAT
1.创建NAT策略绑定地址组 #使用场景:比如P2P场景,任何内部需要访问外部主机,外部主机需要通过固定端口访问内部某个主机。 nat address-group ag11 2 mode full-cone global route enable sec...
8.14 基于IPSEC的OSPFv3保护
1.NE1 #ipsec proposal system-view immediately sysname NE1 ipsec proposal pps1 encapsulation-mode transport transform ah ah authentication-algorithm sha2-256 #ipsec sa ipsec sa ospf...
第4章vsftpd服务-4.1文件传输协议
FTP是一种在互联网中进行文件传输的协议,基于客户端/服务器模式,默认使用20、21号端口,其中端口20用于进行数据传输,端口21用于接受客户端发出的相关FTP命令与参数。 FTP协议有下面两种工作...
7.3 BGP配置详解
1.BGP基础配置 图7-1 BGP基础配置网络拓扑 1)基本配置 [R1]bgp 12 [R1-bgp]router-id 1.1.1.1 [R1-bgp]peer 12.1.1.2 as-number 12 [R2]bgp 12 [R2-bgp]router-id 2.2.2.2 [R2-bgp]peer 12.1.1...
18.2 配置端口安全
图18-2 端口安全配置网络拓扑 1.SW1配置 [SW1]interface GigabitEthernet 0/0/1 [SW1-GigabitEthernet0/0/1]port link-type access [SW1-GigabitEthernet0/0/1]port default vlan 10 [SW1]inter...
4.17 在FR环境配置OSPF
图4-8 FR环境下配置OSPF网络拓扑 图4-9 FR配置网络拓扑 1.R1配置 [R1]interface Serial 0/0/0 [R1-Serial0/0/0]link-protocol fr ietf [R1-Serial0/0/0]undo fr inarp [R1-Serial0/0/0]ip a...
9.4 在客户机测试SSL安全连接
1)客户机http测试 图9-50 客户机http测试 2)客户机https测试 图9-51 客户机https测试 3)域控制器win20162设置强制https访问网站 图9-52 域控制器win20162下载证书 4)客户机http测试 图9-53 ...
第11章 网络安全综合案例2
1.网络安全案例2 1)站点1/2可以访问internet,ISP1为主线路,ISP2为备用线路 2)站点1内部署web/ftp服务器,FTP只能对内网提供服务,WEB服务器允许对internet提供单独固定IP访问,地址为100.1....
2.5 OSPF 报文认证
图2-10 OSPF 报文认证(接口、区域)网络拓扑 1.接口认证 [R2-GigabitEthernet0/0/1]ospf authentication-mode md5 1 cipher dsrw.com [R3-GigabitEthernet0/0/1]ospf authentication-mode md5 ...












