图2-8 OSPF LSA信息网络拓扑 1.R1配置RIPv2 [R1]rip 1 [R1-rip-1]version 2 [R1-rip-1]undo summary [R1-rip-1]network 1.0.0.0 [R1-rip-1]network 12.0.0.0 2.R2配置RIPv2 [R2]rip 1 [R2-rip-1...

图8-8 ISIS支持IPV6网络拓扑 1.R1配置IPV6地址 [R1]ipv6 [R1]interface GigabitEthernet 0/0/0 [R1-GigabitEthernet0/0/0]ipv6 enable [R1-GigabitEthernet0/0/0]ipv6 address 2001::1/64 [R1]i...

1.静态路由方式配置VRF 图18-20 静态路由方式配置VRF网络拓扑 1）R1创建vpn-instance R2，下行端口绑定vpn-instance R2 [R1]ip vpn-instance R2 [R1-vpn-instance-R2]ipv4-family [R1]interface...

图18-12 BFD单跳检测链路配置网络拓扑 1.配置BFD单跳检测链路 1）R1配置 [R1]bfd [R1]bfd R1toR2 bind peer-ip 12.1.1.2 interface GigabitEthernet 0/0/0 //创建三层链路单跳检测的BFD会话R1to...

1.R2在OSPF引入直连路由 [R2]ospf 1 [R2-ospf-1]import-route direct 2.R4查看路由 <R4>display ip routing-table protocol isis 1.1.1.1/32 ISIS-L2 15 74 D 34.1.1.3 GigabitEthernet0/0/0...

图18-5 DHCP Snooping配置网络拓扑 1.SW1配置DHCP [SW1]dhcp enable [SW1]vlan batch 10 [SW1]interface Vlanif 10 [SW1-Vlanif10]IP address 192.168.1.254 24 [SW1-Vlanif10]dhcp select inte...

图15-2 MPLS LDP配置网络拓扑 1）R1配置OSPF [R1]ospf 1 router-id 1.1.1.1 [R1-ospf-1]area 0 [R1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0 [R1-ospf-1-area-0.0.0.0]network 12.1.1.0 0....

图8-2  多区域集成ISIS配置网络拓扑 1.R1配置ISIS [R1]ISIS 1 [R1-isis-1]network-entity 49.0001.0000.0000.1111.00 [R1]interface GigabitEthernet 0/0/1 [R1-GigabitEthernet0/0/1]isis ena...

图2-14  OSPF IP FRR(快速重路由)网络拓扑  动态的IP FRR，利用LFA（loop-Free Alternates）算法预先计算出备份路径，保存在转发表中，以备在故障时将流量快速切换到备份链路上，保证流量不中...

10.1 RSTP 图10-1 RSTP基本配置网络拓扑 1.SW1配置RSTP [SW1]stp mode rstp [SW1]stp root primary [SW1]stp enable 2.SW2配置RSTP [SW2]stp mode rstp [SW2]stp root secondary [SW2]stp enabl...