图4-5  OSPF路由引入网络拓扑 1.R4创建新的直连路由，OSPF引入外部路由 [R4]interface LoopBack 1 [R4-LoopBack1]ip address 44.1.1.1 32 [R4-LoopBack1]quit [R4]interface LoopBack 2 [R4-Lo...

1.R1配置 [R1]interface Serial 0/0/0 [R1-Serial0/0/0]ip address 12.1.1.1 30 [R1-Serial0/0/0]link-protocol fr [R1-Serial0/0/0]fr interface-type dte [R1-Serial0/0/0]fr inarp 2.R2配置 ...

1.创建拨号规则 [R1]dialer-rule [R1-dialer-rule]dialer-rule 1 ip permit //允许ip流量触发拨号 [R1-dialer-rule]quit 2.创建拨号虚拟接口 [R1]interface Dialer 1 [R1-Dialer1]dialer user d...

图14-1 FTP服务配置网络拓扑 1.R1配置FTP服务 [R1]aaa [R1-aaa]local-user dsrw password cipher dsrw.com [R1-aaa]local-user dsrw privilege level 3 [R1-aaa]local-user dsrw ftp-directory ...

图8-5 GVRP配置网络拓扑 1.SW1配置G24口为trunk模式，允许所有VLAN通过 [SW1]interface GigabitEthernet 0/0/24 [SW1-GigabitEthernet0/0/24]port link-type trunk [SW1-GigabitEthernet0/0/24]...

1.router-id一致故障 [R2]ospf 1 router-id 1.1.1.1 Info: The configuration succeeded. You need to restart the OSPF process to validate the new router ID. 2.重启OSPF进程 <R2>reset ...

图8-7 VRRP配置网络拓扑 1.配置R1的OSPF [R1]ospf 1 router-id 1.1.1.1 [R1-ospf-1]area 0 [R1-ospf-1-area-0.0.0.0]net [R1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0 [R1-ospf-1-area-0.0...

图16-1 AC加瘦AP网络配置网络拓扑 16.1 AC加瘦AP网络配置 1.SW1配置 [SW1]vlan batch 100 101 [SW1]interface GigabitEthernet 0/0/1 [SW1-GigabitEthernet0/0/1]port link-type trunk [SW1-Gig...

图13-3 中继DHCP配置网络拓扑 1.R1配置DHCP服务器 [R1]dhcp enable [R1]ip pool dsrw.com [R1-ip-pool-dsrw.com]gateway-list 192.168.1.254 [R1-ip-pool-dsrw.com]network 192.168.1.0 mask 25...

图19-1 IPV6基本配置网络拓扑 1.R1配置 [R1]IPV6 [R1]interface GigabitEthernet 0/0/0 [R1-GigabitEthernet0/0/0]ipv6 enable [R1-GigabitEthernet0/0/0]ipv6 address 2002::1 64 [R1]interfac...