图18-1 PPPoE配置网络拓扑 1.PPPOE server 地址池配置 [R2]interface LoopBack 0 [R2-LoopBack0]ip address 2.2.2.2 32 [R2-LoopBack0]quit //模拟公网 [R2]ip pool pppoe //创建地址池用于分配...

 1.R1配置 [R1-Serial0/0/0]link-protocol ppp Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]:y 2.R2配置 [R2-Serial0/0/0]link-protocol ppp 3.PAP认证...

1.配置RSTP [sw1]stp mode rstp [sw2]stp mode rstp [SW3]stp mode rstp

图8-5 GVRP配置网络拓扑 1.SW1配置G24口为trunk模式，允许所有VLAN通过 [SW1]interface GigabitEthernet 0/0/24 [SW1-GigabitEthernet0/0/24]port link-type trunk [SW1-GigabitEthernet0/0/24]...

图10-1 EasyIP配置网络拓扑 1.R1配置 [R1]interface GigabitEthernet 0/0/0 [R1-GigabitEthernet0/0/0]ip address 12.1.1.1 8 [R1]interface GigabitEthernet 0/0/1 [R1-GigabitEthernet0/0/1]i...

图16-1 AC加瘦AP网络配置网络拓扑 16.1 AC加瘦AP网络配置 1.SW1配置 [SW1]vlan batch 100 101 [SW1]interface GigabitEthernet 0/0/1 [SW1-GigabitEthernet0/0/1]port link-type trunk [SW1-Gig...

1.创建VLAN [sw1]vlan batch 11 to 30 [sw2]vlan batch 11 to 30 [sw3]vlan batch 11 to 30 2.配置trunk [sw1]interface GigabitEthernet 0/0/1 [sw1-GigabitEthernet0/0/1]port link-type trun...